Solar Charge Controllers, Voltage Regulators

Sunsaver This line of reliable wallmount PWM controllers is suited to small applications. Features clear pictograms for connections, internal temperature compensation and user selectable battery type. Available with built-in low voltage disconnect. 5 year warranty.

ProStar Series
This all in one PWM controller will operate in temperatures from -40 to 85º C and features automatic equalization after deep discharges, (optional remote) temperature compensation, battery selector for charge voltage, and low battery load disconnect. Draws only 10 mA. The "M" series includes a digital display meter that shows charge and load currents as well as battery voltage. Five year warranty.

Product #	Model	Maximum Current	Voltage	Remote Temperature Compensation	Low Voltage Disconnect	Adjustable Voltage	Metering
04-27-002	PSTAR 15M	15	12, 24	Option	Oui / Yes	Oui / Yes	Oui / Yes
04-27-004	PSTAR 30M	30	12, 24	Option	Oui / Yes	Oui / Yes	Oui / Yes

Morningstar -ProStar Series Controller

 

Morningstar's TriStar series is a PWM controller, for either industrial or consumer applications, that may be paralleled up to 300 A at 12, 24 or 48 V. Available in 45 and 60 A ratings it is a three function controller that provides Solar or Load control or Diversion regulation. PWM may be switched On or Off to minimize RF noise. The controller is UL and CSA certified. Five year warranty.


# 04-27-014 45 A
# 04-27-015 60 A

Option
# 04-27-027 Metering option
# 04-27-028 Remote metering option
# 04-27-005 Remote temperature sensor, 10 meters

C-Series Strong on performance these regulators can also operate as load controllers. Each controller offers adjustable voltage with optional temperature compensation and metering. For batteries subject to temperatures above and below 25ºC, use a remote temperature sensor to adjust the charging voltage for maximum battery life and capacity. Options: # 04-16-001 Remote temperature sensor, 15 ft # 04-16-002 Remote temperature sensor, 25 ft # 04-16-003 Remote temperature sensor, 35 ft

Product #	Model	Maximum	Operating	Low Voltage	Adjustable
		(A)	(V)	(A)
04-16-004	C 35	35	12, 24	35	Oui / Yes
04-16-005	C 40	40	12, 24, 48	40	Oui / Yes
04-16-007	C 60	60	12, 24, 48	60	Oui / Yes

CM & CM/ R Meter
Designed for use with C Series charge controllers, the CM digital meter mounts onto the front of the charge controller or can be installed up to 100' (31 m) away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on application. The CM/R comes with 50' (15 m) or 100' (31 m) communication cable for remote installation.

# 04-16-009 Digital display
# 04-16-010 Remote display (50 or 100 ft cable, specify)

Voltage Converters Low cost, rugged converters like these provide flexibility on 12 and 24 V remote power systems. We have other high quality converters of various voltage and currents available.
# 04-71-001 5 A, 24/12 VDC Converter
# 04-71-002 12 A, 24/12 VDC Converter
# 04-71-003 30 A, 24/12 VDC Converter

This rugged and versatile unit is used to power a small load at 12 V from a 24 V system, or to power a small 24 V load from a 12 V system. Functions two ways, producing 12 V @ 20 A from a 24 V input or can be connected backwards to produce 24 V @ 10 A from a 12 V input.
# 04-25-001 12 - 24 V, 20 A
# 04-25-002 12 - 24 V, 50 A
# 04-25-003 24 - 48 V, 10 A

Morningstar SunSaver MPPT Controller With a peak conversion efficiency of over 97 % and excellent performance in low insolation levels, this MPPT controller is ideal for smaller 12 or 24 V PV systems up to 400 W and 75 Voc. Features include electronic protection against:
. PV: Overload, Short Circuit, High Voltage
. Load: Overload, Short Circuit
. Reverse Polarity: Battery, PV and Load
. Lightning and Transient Surges
. Reverse Current at Night

# 04-27-022 15 A MPPT Controller

Options:
# 04-27-023 PC MeterBus Adaptor, light controller
# 04-27-024 Remote Meter - may be used with MPPT, Sunsaver Duo or SureSine inverter
# 04-27-005 Remote Temperature Sensor

Morningstar - SunSaver MPPT Controller

Morningstar TriStar MPPT controller
The 45 and 60 A TriStar MPPT controllers provide the industry's highest peak efficiency of 99 %. This extremely reliable controller can be used with battery systems from 12 VDC to 48 VDC with a PV open circuit voltage of up to 150 Voc and when used with the optional TriStar meter or remote meter you can log up to 200 days of data. The maximum self-consumption of this unit is 4 watts and comes equipped with a temperature sensor. CE compliant.
# 04-27-025 45 A
# 04-27-026 60 A

Options:
# 04-27-027 Digital Meter
# 04-27-028 Remote Digital Meter
# 04-27-029 Relay Driver

Morningstar -TriStar MPPT Controller

Matrix MPPT Controller
Now you can charge a 12 volt battery from any 24 volt solar input. Our MPPT controller is a 25 A, high performance current-boosting device that uses an advanced microprocessor control and a high efficiency DC-DC converter to deliver more charging amps to the battery than conventional charge regulators. A high accuracy digital volt and amp meter displays battery voltage and charge current and an auxiliary 100 mA, 13.8 volt trickle charger is provided to maintain a secondary battery. A 15 amp capacity, low voltage disconnect protects the battery from over discharge conditions. Night time battery discharge is eliminated through the use of a high efficiency Schottky diode.
# 04-69-001

Option:
# 04-69-002 Wall mount enclosure

Matrix MPPT Controller

 

OutBack FM60 and FM80
These Maximum Power Point Tracking charge controllers enable your PV system to achieve its highest possible performance. They permit the use of a higher output voltage PV array with a lower battery voltage - such as charging a 24 VDC battery with a 48 VDC PV array. This reduces wire size and power loss from the PV array to the battery location while maximizing the system's performance. Rated for up to 80 A of DC output current, they can be used with battery systems from 12 to 60 VDC with a PV open circuit voltage as high as 150 Voc. The set points are fully adjustable to allow use with virtually any battery type, chemistry, and charging profile. The OutBack FM60 and FM80 come standard with an easy to use and understand display. The four line, 80 character, backlit LCD display is used for programming and monitoring of the system's operation including built-in data logging with 64 days of memory.
# 04-53-038 Controller, 60 A, 150 VDC
# 04-53-037 Controller, 80 A, 150 VDC

Options:
# 08-53-042 Remote temperature sensor
# 08-53-153 Mounting support

OutBack - FLEXmax MPPT Controller

Xantrex MPPT Charge Controller
The Xantrex XW Solar Charge Controller tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries. The XW Solar Charge Controller can be used with 12, 24, 36, 48, and 60-volt DC battery systems and is able to charge a lower nominal-voltage battery from a higher nominalvoltage array. The XW Solar Charge Controller can be installed in single or multi-unit configurations with a Xantrex XW Hybrid Inverter/ Charger or can be used in other solar energy systems where a solar charge controller is needed.
# 04-16-011 60 A MPPT Controller
# 04-16-006 80 A MPPT Controller

Product features
. Convection-cooled design does not require a cooling fan
. Selectable two or three stage charging algorithms with manual equalize
. Configurable auxiliary output
. Input over-voltage and under-voltage protection, output overcurrent protection, and backfeed
. Reverse current protection, over-temperature protection and power derating when output power and ambient temperature are high
. Battery Temperature Sensor (BTS) included
. XanbusT-enabled network communications
. Five-year warranty (10 year warranty optional)

XW MPPT 80 600 Solar Charge Controller

Industrial Voltage Controllers
This industrial regulator uses the latest microcontroller technology to provide state of the art system control for solar power systems up to 240 amps. All charge control, load control, over current protection, are provided in a rugged, compact, 41 x 36 cm NEMA 4X weatherproof fiberglass enclosure.

Standard features include:
. One 30 or 60 A PV input with circuit breaker (may accommodate up to ten, 100 A inputs of 12, 24, 36 or 48 V)
. One 30 A load channel with circuit breaker (may accommodate up to four, 100 A load)
. Temperature compensation
. Positive or Negative ground
. PV and Load shunts, High and low voltage, generator controls
. Manual or automatic battery equalization
. LCD & LED system status w/ keypad access to all system parameters
. Supports serial communications for monitoring via modems, direct-cable, or wireless RF
. Serial network compatibility of addressing thousands of controllers on a single network

Product #	Description
04-70-001	Industrial PV controller, 180 A, 12-48 V, NEMA 4X
04-70-002	Large Industrial PV controller, 300 A, 12-48 V, NEMA 4X
04-70-003	Additional 30 or 60 A PV input channel
04-70-004	Additional 30 or 60 A load control
04-70-005	Additional 100 A PV input channel
04-70-006	Additional 100 A load control
04-70-007	Modem
04-70-008	Data Logging
04-70-009	100 A Battery Breaker