Battery Enclosures & Battery Boxes

We offer custom and standard insulated and non-insulated enclosures for industrial quality power systems for remote applications. Featuring hinged doors with secure locking latches, passive ventilation and a grey powder coat finish they can be designed for up to twelve Group 31 or four Group 8D, with or without a separate control compartment complete with mounting and backplates. Available in pole or ground mount configurations. Full certifications available.

Battery enclosures, assembly

Size of enclosure
Size of enclosure
Size of enclosure
Size of enclosure
22 x 16 x 08
22 x 16 x 15
30 x 30 x 16
36 x 48 x 16
Battery Type
Maximum mumber of batteries only per enclosure 
Group 24, 27, 31
1
2
8*3
12*3
Group 4D
2*1
4*2
Group 8D
2*1
4*2


Note:
* Shelves supplied, must be installed on the site or in the factory on demand NEMA 4-12 type of enclosure, Material: steel, grey powder coated
1 One battery per shelf
2 Two batteries per shelf
3 Four batteries per shelf

Size of enclosure, dimensions
Size of enclosure (inches)
Weight (kgs)
A
B
C
22
16
8
16.5
22
16
15
20.0
30
30
16
49.5
36
48
16
59.0



Battery Boxes
Battery boxes, Quick Cable Battery BoxKeeping a battery bank clean, safe, and secure is made easy with these purpose built battery boxes.
• Impervious to acid, gasoline, oil and solvents
• Flame retardant and heat stable -30° to +200°F (-34° to +93°C)
• UV stabilized (Rating 6)
• 3-way cable channels molded into design
• Lockable cover is held firmly with convenient thumb screws, no special tools required
• Vent holes in cover allow gases to escape, preventing dangerous hydrogen build up

Part No. 
Group Size 
Array Size 
Inside mensions (cm) 
Outside Dimensions (cm) 
Length 
Width 
Height 
Length 
Width 
Height 
01-62-001 
4D 
1
55
24.1
29.2
68
35.6
32.4
01-62-002 
8D High 
1
55
29.8
33
68
41.9
35.6
01-62-003 
Dual 8D End to End 
2
108
30.5
27.3
125.7
46.4
31.1
01-62-004 
Dual 8D Side to Side 
2
54.6
59.7
27.3
68.6
73.7
31.1
01-62-005 
24, 27 
6
61
57.2
32.4
77.5
72.4
35.6
01-62-006 
L16, GC2 
4
72.4
43.2
45.7
91.4
61
53.3


Battery Box Ventilator
Battery box ventilator This ventilator is designed for the positive venting of hydrogen gas by keeping a gravity operated damper closed within the vent pipe except at times when the batteries are being charged and producing hydrogen gas. During battery charging the battery box is force vented with a low power, sparkless fan which overcomes the damper sending the gas outdoors.
# 01-49-002 12 V
# 01-49-003 24 V
# 01-49-004 48 V

 



Matrix Energy Inc. Toll Free: 1-866-630-5630

 

The information contained herein is subject to change without notice.