Français

If your building was built prior to 1980 and is heated by hot water or steam radiators/convectors, you are losing a significant amount of heat through the un-insulated exterior wall.

Novitherm Heat Reflectors reduce heat and energy loss by ensuring that most of the heat from your heating unit is passed into the room and not into the exterior wall.

"Heat Reflectors are a simple product designed to fit baseboard and cabinet convectors and cast iron and steel radiators."

The aluminized surface reflects over 90% of the infra-red heat, normally absorbed by the wall behind the heating units, back into the room. This immediately improves comfort levels and reduces your heating requirements.

The molded shape of the Heat Reflector traps air between the Heat Reflector and the wall surface. This creates a thermal barrier which reduces conductive heat loss to the exterior wall. The saw tooth profile of the Heat Reflector, increases air turbulence and circulation which improves room comfort.

With the Heat Reflectors installed, the core of your heating unit is hotter and returns the water inside the system to the boiler at a higher temperature. This allows you to reduce the overall boiler water temperature to achieve the same or improved comfort levels. The reduction of the boiler water temperature reduces the amount of fuel required to re-heat the water, and you will save money.

Once Heat Reflectors have been installed, your building will have a reduced heating requirement. We strongly recommend that either your mechanical contractor or control company make control adjustments to reduce the system water temperature by a minimum 10 degrees Fahrenheit. Both should be notified of the installation of Heat Reflectors and the new control settings. If company or building personnel also adjust the boiler system controls, they too should be notified of the new lowered settings. This will maximize your building's comfort as well as your energy savings.